GILES GGF Series Скачать руководство пользователя

Страница: 53 / 96

Model: GGF-400, GGF-720

Fryer Operation

5.1.5

Cooking Cycle - General Overview

5.1.6.1

Manually Operating the Basket Lift

5.1.6

Other Controller Features

x 2

COOKING TEMPERATURE

•

MENU NAME

•

COOK TIME

•

STIR OVERRIDE

•

FISH

FILTER

settings are shown on the

Upper Display

READY

message indicates that

cooking oil is at set temperature and fryer is ready for cooking.

When in

READY

state the

TEMP

setpoint is displayed on the

Lower Display

To start the cook cycle, press the

[START]

key once. Basket will automatically lower into

the cooking oil and cook

TIME

will begin counting down on the

Lower Display

To cancel a running cook cycle press the

[CLEAR]

key once, then press it again

to cancel

-OR-

press

[4]

to continue the cook cycle.

STIR ALARM

: When active, an audible alarm tone is sounded at a specific time during the cook cycle, signaling the

operator to stir the cooking product. Stirring helps to promote even cooking and prevent sticking. This feature

must be enabled in

User Settings

Section 5.1.7

and the parameter set.

[STIR ALARM %] =

amount of elapsed time

when the alarm sounds. e.g. if

[STIR ALARM %]

, then during a

10 min.

cook cycle, the alarm will sound after

mins.

of time have elapsed.

Factory-set default: [STIR ALARM ENABLE] = ON

•

[STIR ALARM %] = 62

The menu item

STIR OVERRIDE

setting overrides the

[STIR ALARM ENABLE]

setting, see

Section 5.1.4.1

When cooking cycle time is complete, an alarm will sound and the message

“DONE COOKING”

is displayed and the

cook basket is automatically raised from the oil. Pressing the

[ALARM]

key silences the alarm and fryer returns to

READY

state, ready to cook the next load of product.

Press the

[BASKET]

key once

- OR -

Use [

2] UP

[

8] DOWN

keys to raise or lower the

Basket Lift

NOTE:

▪ Manual lift operation is disabled while the controller is in

PREHEAT

state. This is a safeguard against attempting

to cook product in oil that is not yet at the proper cooking temperature.

▪ Once activated, lift cannot be actuated again for approximately

20 secs

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды