GILES GGF Series Скачать руководство пользователя

Страница: 47 / 96

Fryer Operation

Model: GGF-400, GGF-720

5.1.3

Manually Setting a Cook Time & Cooking Temperature

Set Cook Time: (mm:ss)

Set Cook Temperature: (

NOTE:

Pressing the

TEMP

key twice (2x) will display the

actual oil temperature for 20 seconds

IMPORTANT!

If the

PASSCODE

feature is enabled, Time and Temperature settings

cannot

be manually input without entering the

required password. Operators are limited to only choosing from the list of available programmed Menu Item

Presets, see

Section 5.1.4, Working with Menus

The following explains the process for manually entering a cooking time and temperature.

● Oil will not actually begin heating unless

Selector Switch

is in the

[COOK]

position. Place switch in

[COOK]

position.

● After pressing

[START]

, if actual oil temperature is lower than the entered setpoint, Controller enters

PREHEAT

mode;

[HEAT]

indicator beside

Lower Display

turns

ON.

If Selector Switch is in

[COOK

], the amber

[HEAT]

indicator on the Control panel should turn

... burners ignite and oil begins to heat.

● If oil temperature is already equal to or greater than the entered setpoint, an alarm sounds and the message

“STIR OIL”

is displayed. Press the

[ALARM]

key and stir. If oil remains at setpoint, when oil returns to setpoint,

alarm sounds again and message

“SETPOINT REACHED”

is display. Press

[ALARM]

key. Controller enters

READY

state and Fryer is ready for cooking.

While heating, the real-time actual oil temperature will show on the

Lower 7-Segment Display

. After setpoint is

reached, the display changes to show the

temperature setpoint

Press the

[TEMP]

key

Use keypad to

enter cooking

temperature

setpoint (

F).

Ex: 325 = 325

Press the

[START]

key to save

setpoint.

Press the

[CLOCK]

key

Press the

[START]

key.

Use keypad to enter Cook

Time (mm:ss).

Ex: 1530 = 15:30

Before setting a Temperature, be sure the Selector Switch is in the [OFF] position and that

Pot is filled with cooking oil..

NOTE:

Manually inputting a cook

Time

and/or

Temperature

causes the

Upper

Display

to read

[MANUAL]

instead of displaying a specific Preset Menu Item name.

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды