GILES GGF Series Скачать руководство пользователя

Страница: 81 / 96

Parts List

Model: GGF-400, GGF-720

8. Parts List

Our goal at Giles is to provide the highest possible quality of service and assistance. To help us accomplish this,

please have the following information readily available when calling, along with a brief description of the problem

being experienced. Please record the unit information in the table below for quick reference.

This section lists various parts that are, typically, field replaceable on GGF Gas Fryers. It is provided to aid qualified

service technicians who are servicing or repairing this equipment. Repair of this equipment should only be

attempted by training kitchen equipment service technicians.

8.1

Parts Ordering & Service Information

The information can be found on the

Serial/Data Label located inside the Fryer

cabinet, or on the rear cabinet panel.

IN THE UNITED STATES & CANADA call:

800.554.4537

ALL OTHERS call:

334.272.1457

Normal business hours are 8:00 AM to 5:00 PM Central Time ... calls are handled by an automated answering

system. Please follow the recorded prompts to reach appropriate support. If necessary after hours, leave

voicemail message ... a representative should respond within 30 minutes.

Website:

www.gfse.com

Email:

[email protected]

Model:
Serial Number:
Voltage:
Phase:

Giles

is an equipment manufacturer and does not sell parts direct. Parts are available through authorized service

agents, part distributors, and/or kitchen equipment dealers. If assistance with sourcing parts or equipment repair

service is required, please contact a

GILES

Manufacturer’s Representative to assist with locating a parts source or

authorized service provider near you. For further assistance you may contact the

GILES Technical/Customer Service

Support

as follows:

Содержание GGF Series

































































































Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды

GILES GGF Series, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GGF Series

Отзывы:

Похожие инструкции для GGF Series

Бренды по названию

Популярные бренды