Gestetner B147, Руководство по обслуживанию

Страница: 918 / 1081

SP1102 IFAX SWITCH
IFAX 12 SM
SP IFAX SW
1102 3 02
Bit 0 : RX Text Mail Header Processing
This setting determines whether the header information is printed with text e-mails
when they are received.
0: Prints only text mail.
1: Prints mail header information attached to text mail.
• When a text mail is received with this switch On (1), the “From” address and
“Subject” address are printed as header information.
•
When a mail with only binary data is received (a TIFF-F file, for example), this
setting is ignored and no header is printed.
Bit 1 : Output from Attached Document at E-mail TX Error
This setting determines whether only the first page or all pages of an e-mail attachment
are printed at the sending station when a transmission error occurs. This allows the
customer to see which documents have not reached their intended destinations if sent
to the wrong e-mail addresses, for example.
0: Prints 1st page only.
1: Prints all pages.
Bits 2~3 : Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the
transmission was received normally at the destination.
00: “Dispatched”
Sends from PC mail a request for a Return Receipt. Receives the
Return Receipt with “dispatched” in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The “dispatched” string is included in the Subject string.
01: “Displayed” Sends from PC mail a request for a Return Receipt. Receives the
Return Receipt with “displayed” in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The “displayed” string is included in the Subject string.
10: Reserved
11: Reserved
Note : A mail requesting a Return Receipt sent from an IFAX with this switch set to “00”
(for “dispatched”) received by Microsoft Outlook 2000 may cause an error. If any
setting other than “displayed” (01) causes a problem, change the setting to “01” to
enable normal sending of the Return Receipt.
Bits 4~6 : Not Used.
Bit 7: Image Resolution of RX Text Mail
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
Note : The “1” setting requires installation of the Function Upgrade Card in order to
have enough SAF (Store and Forward) memory to receive images at 400 x 400
resolution.