Gestetner B147, Руководство по обслуживанию

Страница: 153 / 1081

LASER OPTICS
SM 3-39 B147/B149/B190
R
ep
lac
em
en
t
and
Adjus
tm
ent
Adjustments after Replacing the Laser Optics Housing Unit
1. Enter SP mode.
2. Input the values printed on three decals on the new laser optics housing unit
into the following SPs. Each decal contains two values.
Value on the left Value on the right Function
Decal 1 SP2-109-3 SP2-109-2 Laser beam pitch
Decal 2 Not used Not used
Main-scan registration
correction for black and cyan
Decal 3 Not used Not used
Main-scan registration
correction for magenta and
yellow
NOTE: The values on decals 2 and 3 do not need to be input, as the machine
performs the main scan registration correction for each color during
automatic line position adjustment.
3. Print out the following test pattern (Cross Stitch M) with SP5-997.
4. Check these test patterns. If the laser beam pitch is not correct, vertical black
strips seem to appear.
•
Cross-stitch pattern: The thin lines should be of uniform thickness (no
striping effect should appear on the printout).
5. Adjust the laser beam pitch values in SP2-109-2 and -3 until the printout is
correct, as shown below.
6. Execute SP5-993-2 or “Auto Colour Registration” in the User Tools
(Maintenance > Colour Registration > Auto Colour Registration > OK).
Jp:xxxxx KC:-2,-2
C K
B146R150.WMF
Jp:xxxxx MY:-2,-2
Y M
B146R151.WMF
Jp:xxxxx P:46,41
1200dpi 600dpi
B146R152.WMF
B146R153.WMF
Decal 1
Decal 2 Decal 3
Feed direction
Adjustment not completed Adjustment completed