Gestetner B147, Руководство по обслуживанию

Страница: 349 / 1081

COPY SERVICE MODE
SM 5-61 B147/B149/B190
Service
Tables
Initialization *BCU [ 0 to 1 / 1 / 1/step]
0: Disable
1: Enable
5-993-26
Enables or disables the line position adjustment during initialization.
Toner Refresh
*BCU [ 0 to 1 / 1 / 1/step]
0: Disable
1: Enable
5-993-27
Enables or disables the toner refreshing operation.
Repetitive line position adjustments can cause abnormal outputs such as white spots.
To prevent this, toner is consumed and supplied after line position adjustment.
5-993-31 PPS: 125 This SP checks the transfer PPS in the 125-mm/s mode.
PPS Set: 125 *BCU [6043 to 6166 / 6105 / 1 step] 5-993-32
This SP adjusts the transfer PPS in the 125-mm/s mode.
5-993-33 PPS: 62.5 This SP checks the transfer PPS in the 62.5-mm/s mode.
PPS Set: 62.5 *BCU [6043 to 6166 / 6105 / 1 step] 5-993-34
This SP adjusts the transfer PPS in the 62.5-mm/s mode.
Color Adj level
*BCU [LOW, MID, HIGH ]
5-993-35
This SP specifies the level of color adjustment. This SP sets the following SPs as
listed.
HI MID LOW
SP3-906-001 200 200 255
SP3-906-002 200 0 0
SP3-906-003 200 0 0
SP3-906-004 480 480 480
SP3-906-005 1.00 1.00 0.5
SP3-993-001 1 1 1
SP3-993-003 3 5 7
SP3-993-004 1 1 1
SP3-993-005 0 0 0
SP3-993-006 1 1 0
SP3-993-022 100 100 250
SP3-993-024 105 211 422
SP3-993-026 1 0 0
5-994 [Unit Detection ON/OFF] Maintenance Unit Detection ON/OFF
Dev/PCU *BCU
#
[ 0 or 1 / 0 / - ] Alphanumeric DFU
0: Enable
1: Disable
5-994-1
Enables or disables PCU and development unit detection.
NOTE: If this mode is disabled, new unit detection also does not function. Use this
mode as a temporary measure, only when the micro-switches are defective.
Oil Supply Unit
*BCU
#
[ 0 or 1 / 0 / - ] Alphanumeric
0: Enable
1: Disable 5-994-2
NOTE: Use this mode as a temporary measure, only when the unit detection
mechanism is defective.