Gestetner B147, Руководство по обслуживанию

Страница: 1072 / 1081

Firmware History for B147/B149/B190
Page 6 of 15
SYMPTOM CORRECTED
CARD
VERSION
Corrects the following:
•
After canceling a scan using DeskTopBinder, an internal error will occur if another scan is
attempted afterward.
•
Unable to send with Scan-to-Folder to an SMB-connected Win98 PC with shared security
settings enabled when all of the following conditions are satisfied:
- The destination folder is selected from a registered entry in the Address Book.
- A New Password has been set but the User Name has not in the Address Book
MgmtNew Program Folder screen.
- Neither the SMB Default User Name nor Default Password has been set in the File
TransferDefault Username/Password (Send) screen.
•
Network PC stations registered under a given workgroup are not displayed when the
workgroup name consists only of numerical characters (SMB transmission Network
screen).
•
HDD initialization is performed when the main switch is turned on
•
SC990 sometimes occurs when the main switch is turned on.
1.14.1
Corrects the following:
•
Added the B190 product name.
1.18.1
Corrects the following:
•
"Near End" messages for oil and waste toner are only displayed when the display
language is English or Japanese.
•
When a Magazine/Combine job is made, the separator line is printed in the wrong color
or it is not printed.
1.19
Corrects the following:
•
The remote service system captures the Development Counter data even when the
machine is configured to use the Page Counter.
Example: A color print job.
Color Counter BK Counter
Page Counter value +1 0
Development Counter value +3 +1
2 +1
1.20
Corrects the following:
•
The “Oil Near Full” message is displayed in WebImageMonitor (correct: “Oil Near End").
NOTE: Swedish display language only.
•
B/W image quality with the Scanner ACS feature was improved.
NOTE: To enable this change, set SP2-022-007 (Adjustment value of threshold) to a
value of –110.
1.21
⇒
⇒