Gestetner B147, Руководство по обслуживанию

Страница: 353 / 1081

COPY SERVICE MODE
SM 5-65 B147/B149/B190
Service
Tables
6-016-1 Original Size Priority *CTL [ 0 or 1 / 0 / - ]
0: Setting 1
1: Setting 2
Setting 1 Setting 2
Bit 7 A4 (L) LT (L)
Bit 6 11" x 15" DLT (L)
Bit 5 DLT (L) 11" x 15"
Bit 4 LT (S) US Exec (S)
Bit 3 LT (L) 8" x 10" (L)
Bit 2 LG (L) F4 (L)
Bit 1 A4 (L) 16K (L)
Bit 0 8K (L) DLT (L)
Bits used for detection differ depending on
destination as shown below.
Bit 7 to 6: Only for Japan
Bit 5 to 2: Only for US
Bit 1 to 0: Only for EU/AA
[DF Magnification Adj.] DF Magnification Adjustment 6-017
Adjusts the magnification in the sub-scan direction for the ARDF.
6-017-1 DF Magnification Adj. *CTL [ -5.0 to 5.0 / 0 / 0.1 %/step ]
[Punch Position] 6-110
Adjusts the punching position.
Punch 1
US: 2 punch holes
Europe: 2 punch holes
North Europe: 4 punch holes
Punch 2
US: 3 punch holes
Europe: 4 punch holes
Increment: Holes move toward the paper center.
Decrement: Holes move toward the paper edge.
6-110 1 MF Fin 1 *BCU
6-110 2 MF Fin 2 *BCU
[ -7.5 to 7.5 / 0 / 0.5 mm/step ]
6-110 3 Booklet Fin [ -2.5 to 7.5 / 0 / 0.5 mm/step ]
[Staple Position] 6-111
Adjusts the stapling position.
Increment: Staple position moves toward the edge of paper.
Decrement: Staple position moves toward the center of paper.
NOTE: Although the adjustable range is
±
3.5 mm, the stapling position can be
changed only by 1.0 mm when stapling one position at the front or rear side even
when the input value is more than 1.0.
6-111-1 MF Fin *BCU [ -3.5 to 3.5 / 0 / 0.5 mm/step ]
6-111-2 Booklet Fin [ -3.75 to 3.75 / 0. / 0.25 mm/step ]
6-112 [Fold Position] *BCU [ -3.75 to 3.75 / 0. / 0.25 mm/step ]