Gestetner B147, Руководство по обслуживанию

Страница: 146 / 1081

SCANNER UNIT
B147B149/B190 3-32 SM
3.6.10 TOUCH PANEL POSITION ADJUSTMENT
NOTE: It is necessary to calibrate touch panel in the following cases:
•
When the operation panel is replaced.
•
When the controller board is replaced.
• When the touch panel detection function is not working correctly
Do not attempt to use items [2] to [9] on the Self-Diagnostic Menu. These items are
for design use only.
1. Press

, press

, and then press

5 times to open the Self-
Diagnostics menu.
2. On the touch screen press “Touch Screen Adjust” (or press

).
3. Use a pointed (not sharp!) tool to press the upper left mark .
4. Press the lower right mark after it appears.
5. Touch a few spots on the touch panel to confirm that the marker (
+
) appears
exactly where the screen is touched.
If the
+
mark does not appear where the screen is touched, press Cancel and
repeat from Step 2.
6. When you are finished, press [#] OK on the screen (or press

).
7. Touch [#] Exit on the screen to close the Self-Diagnostic menu and save the
calibration settings.
B146R147.WMF
B146R148.WMF