Gestetner B147, Руководство по обслуживанию

Страница: 985 / 1081

COPY SERVICE MODE
B147/B149 5-10 SM
1-105 [Fusing Temperature]
P: Ready *BCU [ 10 to 100 / NA: 10, EU: 20 / 1oC/step ]
Sets the pressure roller temperature for the printing ready condition.
Ready temperature = (Target temperature specified in SP1-104-25 or 105-3 to 28) –
Temperature specified in this SP mode
1-105-2
The following SPs set the target operating temperatures of the heating and pressure
rollers in various modes. (The default settings are different for N. America and
Eur./Asia)
1-105-4 H:N [K] S 125 *BCU
[ 100 to 190 / NA: 180, EU: 175 / 5
°
C/step]
1-105-5 H:N [K] S 185 *BCU
[ 100 to 190 / NA: 180, EU: 180 / 5
°
C/step]
1-105-6 H:N [K] D 125 *BCU
[ 100 to 190 / NA: 170, EU: 165 / 5
°
C/step] **
1-105-7 H:N [K] D 185 *BCU
[ 100 to 190 / NA: 175 , EU: 175 / 5
°
C/step]
1-105-8 H:N[FC] S 62.5 *BCU
[ 100 to 190 / NA: 150, EU: 150 / 5
°
C/step]
1-105-9 H:N[FC] S 125 *BCU
[ 100 to 190 / 180 / 5
°
C/step]
1-105-10 H:N[FC] D 62.5 *BCU
[ 100 to 190 / NA: 145, EU: 145/ 5
°
C/step]
1-105-11 H:N[FC] D 125 *BCU
[ 100 to 190 / NA: 170, EU: 170 / 5
°
C/step] **
1-105-13 H:OHP *BCU [ 100 to 190 / 165 / 5 °
C/step]
1-105-15 P:N [K] S 125 *BCU
[ 0 to 190 / NA: 160, EU: 155 / 5
°
C/step]
1-105-16 P:N [K] S 185 *BCU
[ 0 to 190 / NA: 155, EU: 160 / 5
°
C/step]
1-105-17 P:N [K] D 125 *BCU
[ 0 to 190 / NA: 150, EU: 145 / 5
°
C/step] **
1-105-18 P:N [K] D 185 *BCU
[ 0 to 190 / NA: 145, EU: 155 / 5
°
C/step]
1-105-19 P:N[FC] S 62.5 *BCU
[ 0 to 190 / NA: 125, EU: 130 / 5
°
C/step]
1-105-20 P:N[FC] S 125 *BCU
[ 0 to 190 / 160 / 5
°
C/step]
1-105-21 P:N[FC] D 62.5 *BCU
[ 0 to 190 / NA: 120, EU: 125 / 5
°
C/step]
1-105-22 P:N[FC] D 125 *BCU
[ 0 to 190 / NA: 150, EU: 150 / 5
°
C/step] **
1-105-24 P:OHP *BCU [ 0 to 190 / 150 / 5 °
C/step]
1-105-26 H:TH *BCU [ 0 to 190 / 175 / 5 °
C/step]
1-105-28 P:TH *BCU [ 0 to 190 / 155 / 5 °
C/step]
1-105-29 H:Envelop *BCU [ 0 to 190 / 175 / 5 °
C/step]
1-105-30 P:Envelop *BCU [ 0 to 190 / 155 / 5 °
C/step]
H: Slow Down *BCU
[ 1 to 20 / 5 / 1
°
C/step]
1-105-31
Sets the heating roller temperature for the printing start condition when changing the
process speed.
Fusing temperature must be decreased when the machine changes to a process
speed that is slower than the current process speed (for example, when the speed
changes from 185 mm/s to 62.5 mm/s). The machine idles while reducing the fusing
temperature. When the fusing temperature becomes lower than the ready
temperature, the machine starts printing.
Ready Temperature = Target tempe Temperature specified in this SP mode.
P: Slow Down
*BCU
[ 1 to 20 / 10 / 1
°
C/step]
1-105-32
Sets the pressure roller temperature for the printing start condition when changing the
process speed.
1-105-33 H:SP 62.5 *BCU [ -20 to +30 / +10 / 1
°
C/step]
1-105-34 H:SP 125 *BCU [ -20 to +30 / +10 / 1
°
C/step]
1-105-35 H:SP 185 *BCU [ -20 to +30 / +10 / 1
°
C/step]
1-105-36 P:SP 62.5 *BCU [ -20 to +30 / +10 / 1
°
C/step]
1-105-37 P:SP 125 *BCU [ -20 to +30 / +10 / 1
°
C/step]
1-105-38 P:SP 185 *BCU [ -20 to +30 / +20 / 1
°
C/step]
** Requires Engine firmware 1.09C or later.
[Temperature Display] Fusing Temperature Display ( H eating or P ressure) 1-106
Displays the current temperature of the heating and pressure rollers.
1-106-1 Heat Roller
1-106-2 Pressure Roller
[ 0 to 200 / - / 5
°
C/step]
⇒
⇒
⇒
⇒
⇒
Rev. 06/2004