Gestetner B147, Руководство по обслуживанию

Страница: 293 / 1081

SERVICE PROGRAM MODE
SM 5-5 B147/B149/B190
Service
Tables
Exiting Service Mode
Press the Exit key on the touch-panel.
NOTE: To make the following settings effective, you must turn the main switch off
and on after exiting service mode.
SP Modes Related to the Engine SP Modes Related to the Controller
SP2-208-009
SP2-213-001
SP2-224-001 to 004
SP5-150-001
SP5-994-001 and 002
SP5-998-001
SP5-999 SP5-302-002
SP5-801-003 to 013
SP5-824-001
SP5-825-001
SP5-832-001 to 011
NOTE: If the settings of SP modes 5-993-013 to 015 are changed, these changes
will affect the next line position adjustment.
5.1.3 REMARKS
Display on the Control Panel Screen
Since the maximum number of characters which can be displayed on the control
panel screen is limited (20 characters), the description of SP modes displayed on
the screen needs to be abbreviated The following are the major abbreviations used
for the SP modes for which the full description is over 20 characters.
Paper Type
N: Normal paper
TH: Thick paper
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or Cyan in full
color mode
Paper Feed Station
P: Paper tray
B: By-pass table
Fusing Section
H: Heating roller
P: Pressure roller
Print Mode
S:
Simplex
D: Duplex
Process Speed
62.5,
125, 185