Gestetner B147, Руководство по обслуживанию

Страница: 330 / 1081

COPY SERVICE MODE
B147/B149/B190 5-42 SM
SP5-XXX (Mode)
[mm/inch Display Selection] 5-024
Display units (mm or inch) for custom paper sizes.
5-024-1 mm/inch display *CTL 0: mm (Europe/Asia)
1: inch (USA)
[Counter Method] 5-045
Selects the counting method if the meter charge mode is enabled with SP5-930-001.
NOTE: The counting method can be changed only once, regardless of whether the
counter value is negative or positive.
5-045-1 Counter Method *CTL [ 0 or 1 / 0 / - ]
0: Developments
1: Prints
[Rom Update Display] 5-046
Enables or disables the ROM Update utility. When enabled, this utility will be
displayed in the user program mode.
5-046-1 ROM Update *CTL [ 0 or 1 / 1 /- ] DFU
0: Enable
1: Disable
[A3/DLT Double Count] 5-104
Specifies whether the counter is double clicked for A3/DLT size prints.
5-104-1 Double Count *CTL [ 0 or 1 / 0 / - ]
0: Normal count
1: Double count
5-113 [Optional Counter Type] *CTL
5-113-1 This program specifies the counter type.
0: None 1: Key card (RK 3, 4) 2: Key card (down)
3: Prepaid card 4: Coin rack 5: MF key card
8: Key c Vendor 9: Bar-code Printer
5-118 [Disable Copying] *CTL [0: Not disabled/1: Disabled]
5-118-1 This program disables copying.
5-120 Mode Clear Opt. Counter
Removal *CTL [0: Yes (removed)/1: Standby (installed but not
used)/2: No (not removed)]
5-120-1 This program updates the information on the optional counter. When you install or
remove an optional counter, check the settings.
5-121 Counter Up Timing *CTL [0: Feed/1: Exit]
5-121-1 This program specifies when the counter goes up. The settings refer to “paper feed”
and “paper exit” respectively.
5-127 APS Mode *CTL [0: Not disabled/1: Disabled]
5-127-1 This program disables the APS.