Gestetner B147, Руководство по обслуживанию

Страница: 438 / 1081

FIRMWARE UPDATE
B147/B149/B190 5-150 SM
5.6.5 UPDATING THE LCDC FOR THE OPERATION PANEL
Follow this procedure to update the LCDC (LCD Control Board).
1. Turn the copier main switch off.
2. Insert the SD card into SD Card Slot 3.
3. Switch the copier main switch on.
4. After about 45 seconds the initial screen opens in English.
5. Touch “OpePanel”.
6. Touch “UpDate(#) (or

) to start the update.
After about 9 seconds, the downloading starts.
While the data is downloading, the operation panel goes off and the main
power on key flashes in red at 0.5 s intervals. When the update is finished, the
same key starts flashing in green at 1 s intervals.
7. Switch the copier main power switch off, remove the SD card, then switch the
copier on again.
Exit(0)
ROM: G0000000
ROM: 0.01
ROM: B0705254
ROM: 2.16:16
ROM: B0705370
ROM: 1.22
NEW: G0000000
NEW: 0.0X
NEW: B0705254
NEW: 2.16:16
NEW: B0705370
NEW: 2.00
Printer (1)
Engine (2)
OpePanel.DOM (3)
PCcard -> ROM Page01
UpDate(#) Verify(./*)
B146S927.WMF