Gerber P2C™ 600
User's Manual
Operation
2-14
2.3.13. AUTOLOAD
The AUTOLOAD parameter determines the manner by which vinyl is pulled from
its roll. When AUTOLOAD is ON, the cutter will automatically unroll vinyl as
needed. When the AUTOLOAD option is OFF, the user should unroll sufficient
media before starting to cut.
The default setting is ON which ensures the best results and performance.
After pressing the
key, press the
or
jogging key until the desired
setting is displayed on the LCD. Press
to confirm the new setting.
The active autoload setting is marked with an asterisk (
!
) on the LCD.
2.3.14. LANGUAGE
The MENU LANGUAGE submenu is used to set or modify the dialogue language
on the LCD. After pressing the
key, press the
or
jogging key until
the desired language is displayed on the LCD. Press
to confirm the new
setting.
The information on the LCD can be displayed in English, French, German,
Spanish, Italian or Dutch.
The active language setting is marked with an asterisk (
!
) on the LCD.
2.3.15. MENU UNITS
The MENU UNITS submenu is used to select English or metric menu units.
After pressing the
key, press the
or
jogging key until the desired
menu unit is displayed on the LCD. Press
to confirm the new setting.
The active menu unit setting is marked with an asterisk (
!
) on the LCD.
2.3.16. ROM REVISION
ROM REVISION provides details about the cutter’s firmware. Press the
key
to view the revision number. This information is often helpful to technicians
when diagnosing problems over the telephone.
