Gerber P2C™ 600
User's Manual
Operation
2-7
2.2.8
RESET
The RESET option performs a complete reset of the cutter. Press the
key to
reset the cutter.
2.2.9
RECUT
The RECUT option recuts the last file sent to the cutter (provided that it fit in the
buffer). Press the
key to recut the last file.
2.2.10 LOAD
The LOAD option is used to initiate a load sequence. Press the
key to
initiate a load. The origin can be changed first if necessary. Press the
or
jogging key to change the origin in the Y-direction. Press the
or
jogging key to change the origin in the x-direction. Press the
key to
confirm the new setting. Next, the media window can be changed. Press the
or
jogging key to change the length of the window, or press the
key to change the value of the length of the media window. The
and
jogging keys change the value in 100mm increments; the
and
jogging keys change the value in 10mm increments. When the cutter is
configured to use English units, the increments are 2.5” and 0.5”. Press the
key to finish the load procedure.
2.2.11 ALIGN LOAD
The ALIGN LOAD submenu is used when contour cutting. Refer to section 3 for a
complete explanation of contour cutting. Section 2.3.12 explains how to
change the align method. Press the
key to execute align load.
2.2.12 SYSTEM SETUP
The SYSTEM SETUP submenu presents those menu items normally configured
during the initial set-up, such as when installing the cutter in conjunction with
the cutting software.
Press the confirmation key to access the different submenu items which are
explained in section 2.3.
