Gerber P2C™ 600
User’s Manual
General Information
1-6
1.2.4. INTERFACE
Communication
Standard asynchronous RS-232-C and
Universal Serial Bus (USB)
Serial : I/O Port connector
DB-9P
Mating connector
DB-9S
Byte format
8 data bits, 2 stop bits, no parity
Baud rate
38400, 19200, 9600, 4800, 2400 bps
USB : I/O Port connector
USB series “B” receptacle
Mating connector
USB series “B” plug
TABLE 1-4:
GERBER P2C 600 INTERFACE SPECIFICATIONS
1.2.5. FIRMWARE
Language
DM/PL, HP-GL (758x emulation), HP-GL/2
Supported character sets
Standard ASCII
Supported fonts
Sans serif (single stroke & medium)
ROM-based plots
Confidence plot, DIN plot
TABLE 1-5:
GERBER P2C 600 FIRMWARE
1.2.6. PERFORMANCE
Cutting specifications for 0.05mm (0.002") wax-backed vinyl where the total
media thickness does not exceed 0.25mm (0.010")
Axial speed
50 to 800 mm/s
2 to 32 ips
Default speed
700 mm/s
28 ips
Acceleration
Up to 2 G
Addressable resolution
0.025 mm, 0.1 mm
0.001", 0.005"
Default resolution
0.025 mm
0.001"
Mechanical resolution
0.0127 mm
0.0005"
Accuracy
0.2% of move or 0.25 mm,
whichever is greater*
0.2% of move or 0.010",
whichever is greater*
Knife pressure
0 to 400 gr.
Pen pressure
0 to 400 gr.
Pouncing pressure
0 to 250 gr.
*Excludes differences due to media expansion, stretching, etc.
TABLE 1- 6:
GERBER P2C 600 PERFORMANCE
