Gerber P2C™ 600
User’s Manual
General Information
1-12
1.5.2 FRONT PANEL CONTROLS
Figure 1-3 shows the location of the main components.
FIGURE 1-3:
GERBER P2C 600, FRONT VIEW
1.
Pinch roller lever:
- This lever is used to raise and lower the pinch rollers
during media loading (media loading is discussed in Section 1.7).
2.
Media Drive Sleeves:
- The media drive sleeves move the media only
when the pinch rollers are in the “down” position.
3.
Tool Carriage: -
The tool carriage holds the pen, the pouncing tool or the
knife holder.
4.
Control Panel: -
The control panel consists of 8 keys and can be used to
initiate all cutter activity. Each control panel function is explained in
Section 2.1.
5.
Display:
- The 16-character display informs the user of the cutter’s current
status as well as any actions that need to be taken.
