Genevac HT-12 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 66

Genevac HT-12 Скачать руководство пользователя страница 55

Genevac HT-8 & HT-12 Series II Evaporating Systems

Page 54 of

64

04-4541

Issue 1-9 – June 2008

10 EC Declaration of Conformity

We Genevac Limited

Declare that this product:

HT-8 Series II Evaporating System

Complies with the relevant Essential Health and
Safety Requirements of the European Machinery
Directive (89/392/EEC as amended by 91/368 EEC
and 93/44/EEC). The EMC Directive 89/336/EEC
and the Low voltage Directive 73/23/EEC.

Conformity is demonstrated by compliance with the
following specifications:-

EN 60204-1:1998,

Safety of machinery– Electrical

equipment of machines-Pt 1 General Requirements

EN 249: 1992,

Safety of machinery– Safety

distances to prevent danger zones being reached by
upper limbs.

EN 1088: 1996,

Safety of machinery. Interlocking

devices associated with guards. Principles of design
and selection.

BS EN ISO 12100 pts 1 & 2:2003,

Safety of

Machinery - Basic concepts, general principles for
design.

BS EN 61326: 1998, A1, A2

Electrical equipment for

measurement, control and laboratory use. EMC
requirements.

BS EN 61000-3-2: 2001

, Electromagnetic

compatibility (EMC). Limits. Limits for harmonic
current emissions (equipment input current up to and
including 16 A per phase).

BS EN 61000-3-3: 1995, A1, A2

Electromagnetic

compatibility (EMC). Limits. Limitation of voltage
fluctuations and flicker in low-voltage supply systems
for equipment with rated current <= 16 A.

BS EN 61010-1: 1993,

Safety requirements for

electrical equipment for measurement, control and
laboratory use.

BS EN 61010-2-020: 1995,

Safety requirements for

electrical equipment for measurement, control and
laboratory use. Particular requirements for laboratory
centrifuges.

11 Safety

WARNING!

THIS SYSTEM MUST BE EARTHED

THIS EVAPORATOR IS A SAFETY CLASS 1
PRODUCT ACCORDING TO IEC
CLASSIFICATION. IT MUST NEVER BE USED
WITH ANY INTERRUPTION TO THE SAFETY
EARTH CONDUCTOR. IT IS AN INSTALLATION
CATEGORY II PRODUCT AND IS INTENDED TO
OPERATE FROM A NORMAL SINGLE-PHASE
SUPPLY.

THIS EVAPORATOR HAS BEEN DESIGNED TO
BE USED IN A POLLUTION DEGREE 1
ENVIRONMENT (NO POLLUTION, OR ONLY DRY
NON-CONDUCTIVE POLLUTION).

ANY MAINTENANCE OR REPAIR OF THIS
PRODUCT SHALL BE CARRIED OUT BY
GENEVAC PERSONNEL (OR APPROVED
REPRESENTATIVES OF GENEVAC) USING ONLY
APPROVED SPARE PARTS

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
53
54
55
56
57
...
»

Содержание HT-12



































































Отзывы:

Нет отзывов