Genevac HT-8 & HT-12 Series II Evaporating Systems
04-4541
Issue 1-9 – June 2008
Page 27 of
64
•
The
USER MENU
is
displayed by pressing the
MENU
key
only
when the
chamber is vented and the
rotor stationary.
•
Lamp Layer Selection is
not an option for the HT-4
or Mega.
•
In Operator Controls you
can adjust the screen
brightness to suit your
viewing angle.
•
You can turn the audible
warning off or on.
•
Press
ESC
to leave this
menu
Use the cursor keys to select
the
OPERATOR CONTROLS
and press
ENTER
.
•
Use
the
UP
and
DOWN
cursor keys to adjust the
screen brightness to suit
your viewing angle.
•
Toggle the beep
ON
or
OFF
.
•
Press
ESC
to exit this
screen.
5.5
How to enter control data
All control data is entered from the
RUN
DATA
screen.
From start up of the system and the
software control screen, press
START
to
display the
SELECT RUN screen
.
Select the
VIEW/EDIT DETAILS
option and
press
START
to display the
RUN DATA
screen
.
Use the
UP
and
DOWN
cursor keys to
move between fields.
Unless otherwise stated, press
ENTER
to
‘open’ a field, input your requirement and
press
ENTER
again to ‘close’ the field.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com