manualshive.com logo in svg

General Dynamics R2600 Series, Руководство оператора

Поделиться
Скачать
General Dynamics R2600 Series Скачать руководство пользователя страница 310

 

Figure 21-8. Algorithm Select Display

21-7.1.3 Key Type 

An encryption key is needed when testing in the 
encryption mode.  There are two encryption key 
types that can be selected, either a Test Key or an 
External Key.  The Test Key is the default and is 
used to support most Project 25 testing.  The Test 
Key is a predefined key that is programmed into 
the analyzer for testing purposes only.  In order to 
prevent compromised security, the Test Key 
should never be used for sending secure radio 
communications (all Project 25 analyzers use the 
same Test Key).  The External Key is a key that 
has been loaded from a KVL.  In order to test 
secure communications the keys in both the Unit 
Under Test and the analyzer must be the same.  
The analyzer provides these softkey selections: 

264 

TEST KEY 

This softkey selects the Test Key saved in the 
analyzer's key storage memory.  

EXT KEY 

This softkey selects the External Key saved in 
the analyzer’s storage memory for the selected 
algorithm.  This key is defined by the customer 

and must first be loaded into the analyzer by a 
KVL. 

erase ext key 

This softkey erases from the analyzer’s key 
storage memory any External Key saved for 
the current algorithm. 

load ext key 

 

This softkey starts the sequence of 
programming the analyzer with an External 
Key for the algorithm selected from a Key 
Variable Loader (KVL).  This procedure 
requires a key loading cable and KVL. 

21-7.1.4 Encrypt Self Test 

A self test of the encryption functions is 
performed at power up.  The “Encrypt Self 
Test:” field in the SET UP display (Figure 21-
6) indicates the results of the self test, passed or 
failed. 

21-7.2  Using the Test Key 

  The analyzer can be used to test radios using 

the internal Test Key (707070….hex).  To 
select the Test Key, place the cursor in the 

Содержание R2600 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды