![background image](http://html1.mh-extra.com/html/general-datacomm/sc-ip/sc-ip_installation-and-operation-manual_2210289076.webp)
CLI Reference
CLI Command Tables
B-6
SpectraComm IP Router Card
076R200-000
Installation and Operation Manual
Issue 2
Configure Frame Relay Commands
To access
configure frame-relay
commands, you must be in Admin or Supervisor mode.
Sub-interfaces must have been added previously. When entering interface names in a command
string, type:
ethernet0.
[nnn]
modem0.
[nnn] , or
serial
[n].[nnn] where n is serial
interface =
0
or
1
and where nnn is a sub-interface value =
1 - 999
.
Command Syntax
Details
frame-relay interface-dlci
s
[n]
.
[nnn]
[x]
[t]
Configures DLCI for sub-interface.
Sub-interface name: serial
n
.
nnn
DLCI value
x
= 16 - 991
IP encapsulation type
t
= ietf, cisco
or snap.
frame-relay lmi n391
s
[n]
[x]
Configures LMI full status polling
counter.
Sub-interface name: 1 or 0
N391 counter
x
:
1-255 (default 6)
frame-relay lmi n392
s
[n]
[x]
Configures LMI status response
error threshold
Sub-interface name: 1 or 0
N392 counter
x
: 1 - 10 (default 3)
frame-relay lmi n393
s
[n]
[x]
Configures LMI event-monitored
window
Sub-interface name: 1 or 0
N393 counter
x
: 1 - 10 (default 4)
frame-relay lmi t391
s
[n]
[x]
Configures LMI status inquiry
intervals.
Sub-interface name: 1 or 0
T391 timer
x
: 5 - 30 (default 10)
frame-relay lmi
typ s
[n]
[x]
Configures LMI type.
Sub-interface name: 1 or 0
Type
x
: cisco, ansi or q933a
configure frame-relay traffic-shape
s
[n]
.
[nnn]
[x]
[y]
[z]
Configure traffic shaping.
Sub-interface name: 1 or 0
CIR target bit rate
x
: 0 - 1536000
Optional parameter for Bc bits per
interval, sustained (0-1536000)
Optional parameter for Be bits per
interval, excess (0-1536000)
configure frame-relay ena-traffic
s
[n]
.
[nnn]
Enable traffic shaping
Sub-interface name: serial
n
.
nnn
configure frame-relay dis-traffic
s
[n]
.
[nnn]
Disable traffic shaping
Sub-interface name: serial
n
.
nnn