![background image](http://html1.mh-extra.com/html/general-datacomm/sc-ip/sc-ip_installation-and-operation-manual_2210289016.webp)
Introduction and Specifications
SpectraComm IP Overview
1-4
SpectraComm IP Router Card
076R200-000
Installation and Operation Manual
Issue 2
SC-IP Router Applications
The primary application of the SC-IP is in router mode, providing low-cost, NEBS-compliant IP
connectivity to the carrier’s internal network and between managed sites. NEBS-compliant SC-IP
can be located anywhere within a carrier’s network; for example SC-IP can be located within the
Central Office environment as part of the inside plant, or can be deployed in a remote office or
CEV-Hut environment as part of the outside plant.
Figure 1-1
shows a typical Network Operations Center managing its remote equipment via a
SC-IP at a remote site. With a SC-IP deployed in all remote offices, virtually all remote devices can
be connected back to the NOC through remote device ethernet (LAN) ports or their craft ports.
The SC-IP can be accessed from the NOC over the Carrier’s data network using multiple WAN
interfaces, such as its integral T1 CSU/DSU. In a future release, a synchronous DTE interface to an
external 56/64K DSU (SC521A) is supported.
The SC-IP in router mode exclusively uses static routes to ensure a greater degree of security and
reduce IP traffic in the carrier’s network. This requires the addition of static routes at the NOC and
the SC-IP.
Note
The SC-IP’s LAN-X and IP forwarding functions are mutually exclusive; that is, when the SC-IP is used in
router applications, it cannot employ its LAN-X mode of operation.
Figure 1-1
Typical Deployment of SC-IP Router
DEVICE 2
DEVICE 1
DEVICE 8
.
.
.
LAN
NETWORK
MANAGER
ROUTER
MANAGEMENT
TERMINAL
MODEM
REMOTE OFFICE - Orlando
MANAGED
CRAFT DEVICES
Public
Switched
Telephone
Network
MIAMI NOC
REMOTE DIAL-IN USER
HOST
HOST
ETHERNET
MANAGED
LAN DEVICES
MODEM
TERMINAL
SERVER
SPECTRACOMM 2000
SC-IP
SC 2000 SHELF
T1
Data / Mgmt
Network
IP NETWORK "A"
IP NETWORK "B"
Future Use