The Web Interface
SC-IP Web Screens
4-6
SpectraComm IP Router Card
076R200-000
Installation and Operation Manual
Issue 2
Command Line Web Screen
The SC-IP commands entered at the Command Line web screen operate exactly the same as at the
telnet/terminal CLI interface. The Command line web page displays a series of tables that allow
users and supervisors to execute commands and associated arguments by clicking on the links in
the table. The top level command menu is shown below. When you click a command from the
menu, any required arguments for that command appear. To return to the command line top menu
from any argument screen, use the browser Back button, the SC-IP Command Line selection, or
click the Top Menu link at the bottom of an argument table. For a detailed guide to CLI, including
command tables, context-sensitive help, and practice exercises for configuring typical networks,
refer to Appendix B:
CLI Reference
.
Note
Supervisor Access is required for
configure
and
reboot
commands; thus, with User Access these
commands will not be displayed.
Configuration commands that are restricted to ADMIN mode will not be displayed . You must logout of the
web interface and make a Telnet or terminal connection in ADMIN mode to access/execute those commands.
Table 4-4
Command Line Web Screen
Field
Description
clear
Displays a selectable list of sub-commands that will clear arp-cache entries, counters on one
or more interface or counters on one or more PVC.
configure
(Supervisor Access Only)
Displays a selectable list of sub-commands that are used to configure parameters for SC-IP’s
Frame Relay, Interfaces, Static IP Routing mode, LAN-extension mode, Modem, SNMP, T1
and Terminal Server.
help
Displays a read-only display describing online help, the command access modes, some
common sub-commands and arguments, and information on downloading configuration batch
files.
show
Displays a selectable list of sub-commands that show SC-IP status and several operating,
configuration and network parameters.
reboot
(Supervisor Access Only)
Halts SC-IP operation and performs a reboot using existing configuration.
services
Displays the status of HTTP, SNMP and TFTP services as Enabled or
Disabled
tutorial
Displays a list of tutorials on SC-IP, CLI, Frame Relay and the IP protocol.
