CLI Reference
CLI Command Tables
B-4
SpectraComm IP Router Card
076R200-000
Installation and Operation Manual
Issue 2
CLI Command Tables
This section lists a sampling of the commands, subcommands and arguments used in the SC-IP
command line interface. Commands are shown in their long syntax, but may be abbreviated at the
command line to their minimal unique number of characters. For each command group, observe any
access or operation requirements and exceptions.
Command Overview
The following basic commands are available in all access modes: User mode, Supervisor mode and
Admin mode. Some commands are password-protected, as noted.
Clear Commands
Some
clear
commands require you to be in Admin or Supervisor mode.
Note
These command tables are subject to change as new features are added to the SC-IP.
For complete and up-to-date commands use the SC-IP’s context-sensitive help by entering the
?
char-
acter anywhere in a command string.
Command Type
Command Syntax
Details
SC-IP Commands
connect
Connect to terminal interface or modem
disable
Turn off supervisor/admin commands.
(Password-protected)
enable
Turn on supervisor/admin commands.
(Password-protected)
help
Detailed tutorial of the command line interface, the
three access modes, and the batch utility.
ping
Send ping to remote device
show
Show system parameters.
Utility Commands
batch
Store and or run commands in batch mode.
exit
Exit the SC-IP command line interface.
Command Syntax
Description
clear arp-cache
Clears ARP cache entries.
clear intf-counters
Clears counters on one or more interfaces.
clear login-stats
Clears login account statistics.
(Must be in Suprv or Admin mode to execute this command.)
clear pvc-counters
Clears pvc counters.
clear reboot-counter
Clears the reboot counters.
