GEA T.VIS M-15, Инструкция по эксплуатации

Страница: 4 / 120

Plug M12 / 5-pin (24.5) 43
Plug M12 / 8-pin (24.1) 43
Interface module with 2 sensors 44
6.4.5 Electrical Wiring of AS-Interface 46
Plug M12 / 2-pin (24.3) 46
6.4.6 Electrical DeviceNet Wiring 47
Plug M12 / 5-pin (24.2) 47
DeviceNet adapter module 48
6.4.7 Wiring Diagram for 24 V DC Control Systems with P Logic 49
6.4.8 Wiring Diagram for 24 V DC Control Systems with N Logic 51
6.4.9 Wiring Diagram for T.VIS M-15 with Adapter Module 52
6.4.10 Wiring Diagram for T.VIS M-15 24 V DC 54
6.5 Visual Display 56
6.5.1 Illuminated dome 56
6.6 Mounting the Control Top to Different Valves 56
6.6.1 Mounting to VARIVENT Valve or STERICOM Valve Types N_A/D, R 58
6.6.2 Mounting to a Butterfly Valve T-smart 8000 59
6.6.3 Mounting to a Butterfly Valve T-smart 7 and a Mixproof Butterfly Valve T-smart 9 61
6.6.4 Mounting to ECOVENT Valves N_ECO and W_ECO 62
6.6.5 Mounting to VESTA Valve H_A/M 64
6.6.6 Mounting to VESTA Valve H_A 66
6.6.7 Mounting to Valve N_/E or W_/E or STERICOM Valve 68
6.6.8 Mounting to a T-smart Single-Seat and Double-Seal Valve 70
6.6.9 Fitting to an ASEPTOMAG Valve 71
6.6.10 Replacing Control Tops 72
7 Start-up 73
7.1 Safety notes 73
7.2 73
7.3 Checking Valve Actuation 74
7.4 Service Function 74
7.5 Adjusting the Sensor in the Control Top 74
7.5.1 Seat Valves – Position of Sensor S1 Up 77
7.5.2 T-smart Butterfly Valves 79
7.6 Adjust the proximity switch in the lantern - for unbalanced double disks of the valves D, R, Y, B, T_R 82
7.7 Adjusting the Proximity Switch in the lantern of PMO Valve Type M/2.0 84
7.8 Test procedure for Tuchenhagen PMO valves type M / 2.0 86
7.8.1 Purpose 87
7.8.2 Process Overview 87
7.8.3 Hardware Description 87
7.8.4 Test Procedure 1 87
7.8.5 Test Procedure 2 88
8 Operation and control 90
8.1 Safety instructions 90
9 Cleaning 91
9.1 Cleaning 91
10 Maintenance 92
10.1 Safety instructions 92
10.2 Inspections 93
10.3 Removing the Control Top from the Valve 94
10.4 Dismantling the Control Top into its Components 95
10.4.1 Variants of the Control Top 95
10.4.2 Removing the Cap 95
10.4.3 Removing the Solenoid Valves and the Control Plate 96
10.4.4 Removing the logic element NOT (seal pack) 97
10.4.5 Fitting the Logic Element NOT (Sealing Package) 98
10.4.6 Removing the Adapter Module 99
10.4.7 Removing the Interface Module 99
10.4.8 Removing the pneumatic block 100
10.4.9 Fitting the Pneumatic Block 100
10.4.10 Install pneumatic connections 102
10.5 Maintenance 102
10.5.1 Replacing the Seals on the Base 102
430BAL010697EN_2
4 15.04.2020