GEA T.VIS M-15, Инструкция по эксплуатации

Страница: 82 / 120

7.6 Adjust the proximity switch in the lantern - for unbalanced double disks of the
valves D, R, Y, B, T_R
Fitting the proximity switch holder
Carry out the following steps:
1. Preassemble sliding piece (1), countersunk screw (3) and nut NI (2).
Fig.51
2.
Insert the preassembled part in the slot (4.1) in the lantern (4) with the
mounting hole (1.1) facing in the direction of the housing (5).
Fig.52
3. Turn the nut NI (2) in the slot (4.1) in the lantern through 90° and tighten with
the countersunk screw (3).
Fig.53
®
Done.
Start-up
Adjust the proximity switch in the lantern - for unbalanced double disks of the valves D, R, Y, B, T_R
430BAL010697EN_2
82 15.04.2020