GEA T.VIS M-15, Инструкция по эксплуатации

Страница: 99 / 120

10.4.6 Removing the Adapter Module
Fig.72
Carry out the following steps:
1.
Remove all cables from the connection terminals on the adapter module (47).
2. Unscrew and remove the screws (57.2).
3.
Slacken the screws K (11-16 + 19-20) on the connection terminals of the
interface module (43) and pull the adapter module (47) out of the interface
module (43) by approx. 7 mm in the direction of the arrow and then remove it
from the base (5).
®
Done
Hint!
Assemble the adapter module in the reverse order. Pay attention to the
connection diagrams, see chapter “Connection diagram T.VIS M-15
with adapter module”
10.4.7 Removing the Interface Module
Fig.73
Carry out the following steps:
Maintenance
Dismantling the Control Top into its Components
430BAL010697EN_2
15.04.2020 99