GE
DRAFT
V
OLUSON
™ P8/V
OLUSON
™P6
DIRECTION 5775469, R
EVISION
3
DRAFT (J
ULY
19, 2018)
B
ASIC
S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures
8-135
Section 8-43
Replacement of the SOM in DRFG
8-43-1
Manpower
One person, 30 minutes
8-43-2
Tools
Philips screwdriver
8-43-3
Preparations
1.) Power Off/Shutdown the system as described in
.
2.) Remove the REAR CABINET BEZEL ASSY BT16 and disconnect cables as described in
"Removal Procedure" 2), 3), 4) and 7) on page 8-93
.
3.) Remove the NEST EMI BRKT BT16 as described in
4.) Remove the DRFG as described in
8-43-4
Removal Procedure
1.) Unscrew 5 screws and pull the SOM board out of the DRFG.
8-43-5
Installation Procedure
1.) Install the new parts in the reverse order of removal.
2.) Perform:
FRU8-30: Replacement of the SOM in DRFG - Functional Tests.
Figure 8-194 Unscrewing 5 screws and pulling the SOM board out of the DRFG
CAUTION
!! CAUTION:
When replacing with new SOM, Push the SOM in both side of DRFG ASSEMBLY without
putting weight on the board.
NOTICE
As a new specification, the system can be turned off up to 3 times due to recognizing GPU, initializing
Intel device and Bios. In this case, please turn on the system again.
Bottom view
Top view
pull out
