GE
RAFT
V
OLUSON
™ P8/V
OLUSON
™P6
DIRECTION 5775469, R
EVISION
3
DRAFT (J
ULY
19, 2018)
B
ASIC
S
ERVICE
M
ANUAL
10-10
Section 10-6 - System Maintenance
10-6-2-2
Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted.
Refer to
Table 3-1, ?Approved Peripherals,? on page 3-64
for a list of approved peripherals.
10-6-3
Input Power
10-6-3-1
Mains Cable Inspection
10-6-4
Cleaning
10-6-4-1
General Cleaning
Frequent and diligent cleaning of the Voluson™ P8/Voluson™P6 reduces the risk of spreading infection
from person to person, and also helps to maintain a clean work environment.
Table 10-9 Approved Peripheral/Hardware Option Functional Checks
Step
Item
Description
1
B/W Printer
Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2
Color Printer
Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3
Color Deskjet
(Bluetooth) Printer Verify hardcopy output of the Deskjet (Bluetooth) printer. Clean heads and covers if necessary.
4
DVR
Verify record/playback capabilities of the DVR.
5
DVD Recorder
Verify record capabilities of the DVD Recorder. Clean heads and covers if necessary.
6
DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
7
DVD-Drive
Verify that the DVD-drive reads/writes properly
(export/recall image in Image Management System = Archive)
8
ECG
Verify basic operation with customer.
9
Cellular Modem Power Supply, SIM Card, Placing SIM Card, Antenna, Loop Fastener, Hook Fastener
Table 10-10 Mains Cable Inspection
Step
Item
Description
1
Unplug Cord
Disconnect the mains cable from the wall and system.
2
Inspect
Inspect it and its connectors for damage of any kind.
3
Terminals
Verify that the LINE, NEUTRAL and GROUND wires are properly attached to the terminals, and that
no strands may cause a short circuit.
4
Inlet Connector Inlet connector retainer is functional.
Table 10-11 General Cleaning
Step
Item
Description
1
Console
Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire system.
Be careful not to get the cloth too wet so that moisture does not enter the console.
Caution:
DO NOT allow any liquid to drip or seep into the system.
2
LCD Monitor
Clean LCD Monitor surface with a fluid detergent in warm water on a soft, damp cloth.
Caution:
DO NOT spray any liquid directly onto the Voluson™ P8/Voluson™P6 covers, LCD Monitor,
keyboard, etc.
