GE
RAFT
V
OLUSON
™ P8/V
OLUSON
™P6
DIRECTION 5775469, R
EVISION
3
DRAFT (J
ULY
19, 2018)
B
ASIC
S
ERVICE
M
ANUAL
7-10
Section 7-4 - Screen Captures and Logs
Section 7-4
Screen Captures and Logs
There may be times when the customer or field engineer will want to capture a presentation on the
screen so it may be recovered by the OnLine Center. This is accomplished by saving the image(s):
A.) to Archive and export them (as jpg, bmp or tiff) to DVD/CD±R/RW or external USB drive.
B.) as jpg and bmp to D:\export by pressing the
ALT
+
P
key on the alphanumeric keyboard.
Note:
Successive
ALT
+
P
keystrokes (max. 20) overwrite existing snapshots at destination HDD!
C.) creates one snapshot (Alt-D.bmp) + “Full Backup” of the System state (fullbackup -> fb1) saved by
pressing the
ALT
+
D
key on the alpha-numeric keyboard.
NOTE:
For further details about Alt + D, see
7-4-1
Capturing a screen
The following is the generic process to capture any screen from the System .
1.) Navigate to, and display the image/screen/volume to be captured.
2.) Press the
P1
,
P2
, or
P3
key (depending on system configuration) on the control panel and store the
image onto the clipboard (frame on left side of the screen).
NOTE:
A short summary of
P1
,
P2
, and
P3
key´s configuration is shown in the status area on the screen.
3.) Select the stored image(s) and export them to DVD drive, an external USB drive (optional) or
mapped Network drive (jpg,bmp, tiff or Volume file).
7-4-2
Capturing Network Logs with Network Sniffer
Wireshark is a network sniffer program that monitors network traffic and allows you to capture network
data without redirecting or altering it.
NOTE:
Logs collected should be stored under D:export to ensure that these sniffer logs will be included in the
zip file. when you perform Alt + D or export system data via System Setup - Administration - Service.
1.) On the Regular Scan Screen, press Alt + N. This launches the network sniffer application.
Figure 7-7 summary of keys configuration
