GE
DRAFT
V
OLUSON
™ P8/V
OLUSON
™P6
DIRECTION 5775469, R
EVISION
3
DRAFT (J
ULY
19, 2018)
B
ASIC
S
ERVICE
M
ANUAL
Chapter 4 - Functional Checks
4-21
Load Full System Configuration (Full Backup)
9.) Click the NEXT button and then select YES to start, or NO to cancel the restore procedure.
After restoring the data, the Voluson™ P8/Voluson™P6 reboots and the application starts again.
10.)Confirm that the date and time are set correctly
4-5-5
Delete Full System Configuration (Full Backup)
1.) Press the
F2
key on the control panel.
2.) In the “Utilities” menu select SYSTEM SETUP to invoke the setup desktop on the screen.
3.) On the left side of the screen select BACKUP and then click the
SYSTEM CONFIGURATION
tab.
4.) Click the DELETE button of the “Full System Configuration” group.
5.) Choose the Destination.
6.) Click on the backup to be deleted (additional information is displayed in the table).
7.) Select the DELETE button.
Figure 4-22 Start Restore Backup now?
Figure 4-23 System Configuration Delete
WARNING
WARNING
!! WARNING:
There is no “ UNDO” function for this action!
Choose Destination
Select Backup
Click [Delete]
