GE T1000, Техническое руководство

Страница: 172 / 302

GE Reason Switches Chapter 7
– Configuration
172 REASON SWITCHES-TM-EN-3
o
Profile Name & Index : shows the name of the
profile configured at the Profile Name field at
IPMC Profile Table Setting menu and an index
number identifying each rule. Each added rule
has an incremental decrease index, starting
at index 1 and ending in index 64. Higher
index numbers (that is, first created rules)
have higher priority on lookup, and the
highest priority is performed to the first rule
created, which has index number 1;
o
Entry Name : indicates which entry would be
used at this profile rule. Entries are created at
the Address Entry menu and allow creating
names and IP Multicast address ranges to be
used at profile rules. Allowed values are the
entries created. If no entry is required, the “ - “
character means no entry used by this rule;
o
Address Range : indicates the IP multicast
address range allowed to be used by the
selected entry. Entries are created at the
Address Entry menu and allow creating
names and IP Multicast address ranges to be
used at profile rules. If no entry is selected,
the “~” character means no entry selected;
o
Action : indicates group learning action
allowed to be executed by this rule. After
receiving join or report messages from a
given group, switch will compare if IP address
range is compatible with the allowed range of
this rule. If IP multicast address message
received match with allowed IP multicast
address range, this field will specify which
action would be performed. Possible values
are Deny and Permit. By default, the Deny
option is selected. Deny action means
messages from a group at the allowed
address range should be dropped, and Permit
action means that messages from a group at
the allowed address range should be learned;
o
Log: indicates logging preference after
receiving join or report messages from a
given group with the allowed IP address
range of this rule. Possible values are Disable
and Enable. By default, the Disable option is
selected. Disable logging means information
from a group at the allowed address range
will not be logged, and Enable logging means