GE SCOUT100-Ex Скачать руководство пользователя страница 222

Страница: 222 / 282

Section 10 — Create, Edit, and Delete Items

211

Attach Note

You can attach notes to the machines, points, and axes within the
machine structure. To attach a note:

Use the arrow keys to select the item you wish to attach the note to.

Press

to display the

Note

menu.

Press

Create New Note

Select the required note.

Press

to attach it to your chosen item or

to create a new

note.

TIP: Press

again to attach additional notes (if required).

Press

to return to the previous menu — The note

icon will

display beside your chosen item to indicate a note is attached.

View Note

To view a note:

Use the arrow keys to select the item with the attached note.

Press

Notes

Detach Note

Removing a note only detaches it from a selected item. The note will
remain in the

Note Entry

menu where you can select and attach it to

other items.

To detach a note:

Use the arrow keys to highlight the item with the note attached.

Press

to display the

Note

menu > Select the note you wish to

remove.

Press

Delete Note.

Press

to return to the previous menu.

Содержание SCOUT100-Ex



























































































































































































































































































Результаты поиска

Содержание SCOUT100-Ex

Отзывы:

GE SCOUT100-Ex, Справочное руководство, Страница: 222 / 282

Результаты поиска

Содержание SCOUT100-Ex

Отзывы: