Publication No. SBC330-0HH/3
Configuration 19
4 • Configuration
This
section
describes
the
configuration
of
jumpers
on
the
SBC330.
The
board
is
delivered
with
push
‐
on
links,
but
for
more
rugged
or
military
applications,
jumper
pins
must
be
connected
using
wire
wraps
and
conformal
‐
coat.
4.1 Jumper Locations
The
SBC330
has
two
banks
of
4
x
2
‐
way
jumpers
that
affect
booting
and
need
to
be
set
correctly.
4.2 Default Link Settings
The
SBC330
is
shipped
from
the
factory
with
some
links
fitted.
This
simplifies
the
most
likely
use
of
the
SBC330.
Some
jumpers
are
essential
and
some
are
not.
Before
changing
any
of
the
link
options,
refer
to
the
following
sections.
NOTE
If you are about to install your board and power-up for the first time, leaving your board in the
default configuration will enable board operation to be proven prior to tackling any further
configuration issues.
