Innova 2000 Cardiovascular Imaging System
GE Medical Systems
Pre–Installation Manual
REV 5
pim 2337741–100
163
3
TOOLS AND TEST EQUIPMENT
Refer to Table 30. To obtain a list of tools and test equipment for components not specified in
Table 30, refer to the appropriate component Pre-Installation Manual listed in Chapter 2.
Table 30 – INNOVA LC SYSTEM REQUIRED TOOLS AND TEST EQUIPMENT
PRODUCT OR
COMPONENT
TOOL OR
TEST EQUIPMENT
USED FOR
SOURCE
RECEIVED
(DATE)
Innova LC Positioner
Service Engineer’s
Tool Case
General Use
Level, Protractor Type
Positioner Checks
Plumb Line included
in 46–216640G1
Positioner Checks
Torque Wrench
2 to 20 daN.m
(15 ft. lbs. to 150 ft.
lbs.)
Positioner Checks
1/2 inch Ratchet
Wrench (2)
Raise and Lower
Positioner shipping
dolly
Wrench, Spanner
(46–176584P1)
High Voltage Cable
Installation
Laptop Computer
(MS–DOS Windows)
Positioner Configura-
tion and Calibration
Status Display
Same as for Innova LC
(Service Engineer’s Tool Case)
Omega IV Table
Same as for Innova LC (Service Engineer’s Tool Case)
Fill in any additional tools or test equipment as required
POSTIT Cabinet
Same as for Innova LC (Service Engineer’s Tool Case)
Fill in any additional tools or test equipment as required
X–Ray Head
Same as for Innova LC (Service Engineer’s Tool Case)
Fill in any additional tools or test equipment as required
Control MPPU1
Same as for Innova LC (Service Engineer’s Tool Case)
Fill in any additional tools or test equipment as required
Power MPPU2
Same as for Innova LC (Service Engineer’s Tool Case)
Fill in any additional tools or test equipment as required
