GE Baker Hughes Masoneilan SVI FF, Инструкция по установке и эксплуатации

Страница: 175 / 264

Masoneilan SVI FF Instruction Manual =
|
175
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
DEADBAND (3) from 0 to
20 5 Not writable for Standard Diagnostics version.
TIME (4) 1 to 60 60 The user defined allowable duration in seconds of CUR-
RENT below ALERT_POINT before alert is set to True.
Not writable for Standard Diagnostics version.
ALERT (5) FALSE FALSE True if the CURRENT has reached below ALERT_POINT and
have not come above ALERT_POINT.
Not writable for Standard Diagnostics version.
HISTORIC ALERT (6) True -
False FALSE True if ALERT is true.
Not changed if ALERT is false.
Not writable for Standard Diagnostics version.
ENABLE (7) True -
False TRUE True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT
reporting.
Not writable for Standard Diagnostics version.
FIND_STOPS (67) 0 Man Should be used by method or DTM only.
Find Stops - Writing to the FIND_STOPS parameter triggers
execution of the following commands in the valve:
1, Find stops Start - starts an automatic full find stops
process.
2, Find stops Cancel - cancels a find stops process (full
or partial).
3, Find stops Set Closed - moves the valve to full
closed position.
4, Find stops Set Open - moves the valve to full open
position.
5, Find stops Accept - accepts the valve position as
one of the stops - not finalized until commit.
6, Find stops Commit - saves the stop positions
changed and recalculates scaling factors.
11, Find stops Running (un-selectable) - read only.
0, Find stops Not running (un-selectable - read only.
Note, that FIND_STOPS can be started only when the TB is
in MAN mode. The expectation is that the method or the
DTM will not allow you to change the mode before the
operation is completed.
Table 31 Transducer Block Parameters (Continued)
Parameter (in bold)
Sub-parameter (Index)
Range
Initial
Value
Mode
Description