3D Probe-Positioners
Instruction Manual
Страница 1: ...3D Probe Positioners Instruction Manual ...
Страница 2: ...base table clamp or magnet foot Finally screw the probe holder C to the other side of the positioner and thighten it with a combination wrench width across flats 7 mm too Clamping the Probe Release the holder tensioning knob E and clamp the probe into the probe holder C as shown in the figure To fix the probe turn the holder tensioning knob E contrary until the probe is fixed Three different sizes...
Страница 3: ... E Handling 3D Probe Positioners The 3D Probe Positioner can be operated easily Hold the 3D Probe Positioner and loosen the central tensioning knob D until the 3D Probe Positioner can be moved Bring the 3D Probe Positioner into the desired position and fix the device by turning the central tensioning knob D contrary With the spring tip of PMK probes you can set precisely the contact to the measuri...
Страница 4: ...X Revision G September 2015 PMK 3D Scope Probe Positioner Order No Type Description 893 350 001 MSA 100 PMK Probe Positioner with steel base span width 200 mm HAL512 893 350 002 MSB 40 PMK Probe Positioner with table clamp span width 200 mm HAL512 893 350 003 MSC 85 PMK Probe Positioner with vacuum clamp span width 200 mm HAL512 893 350 004 MSM 130 PMK Probe Positioner with magnet foot span width ...
