GE Baker Hughes Masoneilan SVI FF, Инструкция по установке и эксплуатации

Страница: 185 / 264

Masoneilan SVI FF Instruction Manual =
|
185
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
CLEAR_STATUS (88) NA NA Clear status and faults:
0 - No Action.
1 - Clear Current Status.
2 - Clear Current and Historic Status.
OPEN_STOP_
ADJUSTMENT (89) 60.00 to
100.00 Man,
OOS Keep set at 100%.
SETPOINT_SOURCE
(90) 1 to 3 1 OOS Describes the source of the set point:
1 - Control is coming from AO-FINAL_VALUE.
2 - Control is coming from DO-FINAL_VALUE_D in
Open/Close mode.
3 - Control is coming from DO-FINAL_VALUE_DINT in
1% steps mode.
SETPOINT (91) Setpoint being transferred to the setpoint position.
STATUS (1) GOOD Status.
VALUE (2) -50, 199 Value: Floating value representing the actual position.
ACTUAL_POSITION (92) Actual Position.
STATUS Status.
VALUE -50, 199 Value: Floating value presenting the actual position.
RAW_POSITION (93) 0 Temperature compensated Raw Position Sensor value; in
counts. The value should be between =/- 15000 for the
valve to operate normally.
ALERT_ACTION (94)
MAPPED_TO_RB (1) See
Descrip-
tion Any Indicates if alarms are reported by the RB:
1: Map to RB (default).
2: Report in TB.
Deviation Alert (2) 0 - 3 2 Any The user can select one of the following:
0: Not Reported.
1: Warning Data.
2: Maintenance Required.
3: Device Failure.
Position HIHI Alert (3) 0 - 3 2 Any Defines the action for a HIHI alert.
Position HI Alert (4) 0 - 3 1 Any Defines the action for a HI alert.
Position LO Alert (5) 0 - 3 1 Any Defines the action for a LO alert.
Position LOLO Alert (6) 0 - 3 2 Any Defines the action for a LOLO alert.
Set Point Timeout Alert
(7) 0 - 3 2 Any Defines the action for a Set Point Timeout alert.
Table 31 Transducer Block Parameters (Continued)
Parameter (in bold)
Sub-parameter (Index)
Range
Initial
Value
Mode
Description