GE Baker Hughes Masoneilan SVI FF, Инструкция по установке и эксплуатации

Страница: 166 / 264

© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
166
|
BHGE
HISTORIC ALERT (5) 0 0 True if ALERT is true.
Not changed if ALERT is false.
Not writable for Standard Diagnostics version.
ENABLE (6) 0 TRUE True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT
reporting.
Not writable for Standard Diagnostics version.
POSITION_ERROR_
HISTOGRAM (40) An array of counters that defines average position error in
each region. The values are calculated only if the device is
under control - and the quality of the set point is GOOD.
No value for Standard Diagnostics version.
5%-CLOSED (1) 0 Average position error in the range between closed and
5%.
No value for Standard Diagnostics version.
10% (2) 0 Average position error in the range below 10%.
No value for Standard Diagnostics version.
20% (3) 0 Average position error in the range between 10% and
20%.
No value for Standard Diagnostics version.
30% (2) 0 Average position error in the range between 20% and
30%.
No value for Standard Diagnostics version.
40% (3) 0 Average position error in the range between 30% and
40%.
No value for Standard Diagnostics version.
50% (4) 0 Average position error in the range between 40% and
50%.
No value for Standard Diagnostics version.
60% (5) 0 Average position error in the range between 50% and
60%.
No value for Standard Diagnostics version.
70% (6) 0 Average position error in the range between 60% and
70%.
No value for Standard Diagnostics version.
80% (7) 0 Average position error in the range between 70% and
80%.
No value for Standard Diagnostics version.
Table 31 Transducer Block Parameters (Continued)
Parameter (in bold)
Sub-parameter (Index)
Range
Initial
Value
Mode
Description