GE Baker Hughes Masoneilan SVI FF, Инструкция по установке и эксплуатации

Страница: 170 / 264

© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
170
|
BHGE
VALUE (2) No value for Standard Diagnostics version.
PRESSURE_RANGE (51) Man,
OOS The range of the supply pressure.
This parameter has to be synchronized with the scale
parameter of the Analog Output block.
EU_100 (1) 0-1034.2 1034.2 Upper Range for the supply pressure. The value should be
recalculated if the Unit Index is changed. This value is not
user changeable.
EU_0 (2) 0-1034.2 0 Lower Range for the supply pressure. This value is not user
changeable.
UNITS_INDEX (3) See
Descrip-
tion kPa
(1133) Engineering Units The following values should be avail-
able:
1133: kPa.
1141: psi.
1137: bar.
DECIMAL (4) 3 3 3
SUPPLY_
PRESSURE_HI_ALERT
(52) Not writable for Standard Diagnostics version.
PRESSURE (1) Current SUPPLY_PRESSURE value.
Not writable for Standard Diagnostics version.
ALERT_POINT (2) 0-1034.2 1034.2 SUPPLY_PRESSURE Value, above which the ALERT is set to
True. Should be in the units of pressure.
Not writable for Standard Diagnostics version.
DEADBAND (3) 0 - 20 0.5 SUPPLY_PRESSURE change, required to clear the ALERT ,
once it was set to True.
Not writable for Standard Diagnostics version.
ALERT (4) FALSE True if the SUPPLY_PRESSURE has reached above
ALERT_POINT and have not come below
(ALERT_POINT-DEADBAND).
Not writable for Standard Diagnostics version.
HISTORIC ALERT (5) True -
False FALSE True if ALERT is true.
Not changed if ALERT is false.
Not writable for Standard Diagnostics version.
ENABLE (6) True -
False TRUE True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT
reporting.
Not writable for Standard Diagnostics version.
Table 31 Transducer Block Parameters (Continued)
Parameter (in bold)
Sub-parameter (Index)
Range
Initial
Value
Mode
Description