GBC StreamWire, Руководство по обслуживанию, Страница: 77 / 455

GBC StreamWire 07/23/2020 RTPS
2-62
RTP 5.21 J391- HOLDER ROTATE VERTICAL TIMEOUT
J391 is triggered if it takes longer than the specified time for S34 Holder
Rotate Vertical to get covered when the Holder moves to its vertical
position as it moves to its linear Home position.
1. Do GP 6.4 to check S34 Holder Rotate Vertical sensor
This clears the fault
Yes - Return to normal operation;
No - Go to Step 2
2. Do GP 6.5 to check M14 Holder Rotate motor
This clears the fault
Yes - Return to normal operation;
No
- Go to step 3
3. Check the presence and tightness of the two socket head screws on
the holder rotate crack
Screws are present and sufficiently tight
Yes - Go to Step 4;
No
- Tighten the screw and resume normal operation
4. Check for the presence and tightness of the fasteners shown in the
below image at the Holder rotate pivot
The fasteners are sufficiently tight
Yes - Go to Step 5;
No - Tighten the fasteners and resume normal operation