GBC StreamWire, Руководство по обслуживанию, Страница: 38 / 455

GBC StreamWire 07/23/2020 RTPS
2-23
RTP 3.3.2 First jammed sheet before the Diverter gate
Follow the below procedure when the first jammed sheet is before the
Diverter gate
1. Inspect Diverter gate solenoid L1- GP 6.18.
This clears the fault
Yes - Return to normal operation No - Go to Step 2
2. Check for any obstructions in the paper path leading to the diverter
gate. Remove any obstruction.
This clears the fault
Yes - Return to normal operation No - Go to Step 3
3. Do GP 6.4 to check sensor S1, S12, 13, 15, 6, 7, 8, 9, 10 and 41.
This clears the fault
Yes - Return to normal operation No - Go to Step 4
4. Do GP 6.5 to check motors M1, M16, and M17.
This clears the fault
Yes - Return to normal operation No - Go to Step 5
5. Do GP 6.6 to inspect solenoids L2, L3 and L4.
This clears the fault
Yes - Return to normal operation No - Go to Step 6
6. Inspect rollers N1, N2, N3, N4, and N5- GP 6.14
This clears the fault
Yes - Return to normal operation No - Go to Step 7
7. Inspect the paper transport latch, if necessary perform adjustment.
Ensure the paper transport is securely closed.
This clears the fault
Yes - Return to normal operation No - Go to Step 8
8. Inspect the transition from the Steering module section to the
subsequent section. The steering module lower panel and transport
module lower panel should be in line with each other.
The panels are in line with each other
Yes
- Go to Step 9
No - Using REP 6.21 Steering module replacement, make the
necessary adjustments.
9. Do GP 6.3.5 FIRMWARE UPGRADE Procedure to Re-flash the
firmware for eWire.
This clears the fault
Yes - Return to normal operation No - Escalate to second level