GBC StreamWire, Руководство по обслуживанию, Страница: 61 / 455

GBC StreamWire 07/23/2020 RTPS
2-46
RTP 5.3 J372- S39 DETECT AT REV GATE TIMEOUT
J372 is triggered if it takes longer than specified time for the Holder to
reach S39 Holder at Reverse Gate sensor
1. Do GP 6.4 to check S39 Holder at Reverse gate sensor
This clears the fault
Yes - Return to normal operation;
No
- Go to Step 2
2. Check the Condition of the Holder linear drive belt- Front and Rear
(PL 5.21)
The timing belt is in good condition. There are no missing teeth
and the belt is not frayed
Yes - Go to Step 3;
No
- Replace the damaged timing belt (REP 8.11, 8.12) and resume
operation
3. Check the tension of the Holder linear drive belt tension- Front and
Rear (ADJ 1.6)
The tension of the timing belts is good
Yes - Go to Step 4;
No - Do to ADJ 1.6 to set the belt tension and resume operation
4. Visually check if the rollers of the Holder are centered in the cam
tracks.
The rollers are centered in the cam tracks
Yes - Go to Step 5;
No - Loosen the cam track assembly and bring the roller inside the
cam track. Resume operation
5. Check if the set screws on all the six pulleys associated with the
Holder linear drive are tight
The set screws are tight
Yes - Go to Step 6;
No - Tighten the loose set screw(s) and resume operation