GBC StreamWire, Руководство по обслуживанию, Страница: 357 / 455

General Procedures and Information 07/23/2020 GBC StreamWire
6-20
GP 6.3.15 ROTATE DELAY Setting
The Rotate Delay setting will allow the operator to change the position of
the holder rotate by delaying the stop of the holder a set amount of time.
Using the procedure described in GP 6.1.3 , enter Service mode.
Use the up and down arrows to scroll down to the ROTATE DELAY
option.
ROTATE DELAY
*
The below screen will appear
HORIZONTAL
*
VERTICAL
For both the horizontal and vertical, 0 is the default setting. The Rotate
Delay for both settings value can be adjusted on a range of 0 to +100.
When the desired value has been selected, press OK/ENTER to
return to the service menu.
Select EXIT and press OK/ENTER to return to the top level menu.
GP 6.3.16 DESKEW ADJUST
The DESKEW ADJUST setting will allow the operator to change the
amount the steering rollers corrects for skewed sheets entering the eWire.
Using the procedure described in GP 6.1.3 , enter Service mode.
Use the up and down arrows to scroll down to the DESKEW ADJUST
DESKEW ADJUST
*
The below screen will appear
DESKEW ADJUST *
0
0 is the default setting. The Deskew Adjust value can be adjusted on a
range of -20 to +20. When the desired value has been selected, press
OK/ENTER to return to the service menu.
Select EXIT and press OK/ENTER to return to the top level menu