GBC StreamWire, Руководство по обслуживанию, Страница: 369 / 455

General Procedures and Information 07/23/2020 GBC StreamWire
6-32
Locate Sensor S41:
•
S41 is located on the Alignment Module.
•
In order to test S41, do GP 6.3.4 Functional Tests and select
“Aligner Test.” Remove the Interlock cheater before the
Functional Test is complete. Return to Sensor Check mode to
confirm the sensor is unblocked. Insert the cheater which will
cause the Aligner to home. S41 should then be blocked.
S41 is located on the Alignment Module
Locate Sensor S46 and S49:
• Raise the Top Cover and Lower Bypass.
• Manually move the closer module forward or back if needed
to unblock the Sensor.
•
The Sensor can be blocked or unblocked by inserting a piece
of paper or other solid object.
S46 and S49 are located the back frame behind the closer
Check Sensors Procedure (S18-S20, S24, S31-S41, S46-S49)
1. Do GP 6.3.1
SENSORS Procedure
. Check to make sure all sensors
show “0” on the LCD when unblocked and “1” when blocked.
If any sensor shows “1” when unblocked, clean that sensor. Also
check if there is any obstruction in the sensor path.
All sensors show “0” when uncovered and “1” when covered
Yes - Return to the RTP that directed you here.
No - Go to Step 2
S46 S49
S41