GBC StreamWire, Руководство по обслуживанию, Страница: 358 / 455

GBC StreamWire 07/23/2020 General Procedures and Information
6-21
GP 6.3.17 HOLDER
The holder transfer position setting will allow the service technician to
change the position of the holder as it comes to mate with the feeder.
Using the procedure described in GP 6.1.3 , enter Service mode.
Use the up and down arrows to scroll down to the HOLDER menu.
HOLDER
*
The below screen will appear
HOLDER TO XFER *
60
60 is the default setting. The HOLDER TO XFER value can be adjusted
on a range of -100 to +100. When the desired value has been
selected, press OK/ENTER to return to the service menu.
Select EXIT and press OK/ENTER to return to the top level menu.
GP 6.3.18 ELEM XFER HALF
The Element Transfer Position Half setting will allow the operator to
change the position of the element on the Element Feeder Belt when it is
transferred to the holder for A5 and statement sized elements.
NOTE: This setting only affects A5 and statement. See GP 6.3.14 to
adjust the transfer position for A4 and letter size elements.
Using the procedure described in GP 6.1.3 , enter Service mode.
Use the up and down arrows to scroll down to the ELEM XFER POS
ELEM XFER HALF
*
The below screen will appear
ELEM XFER HALF *
0
0 is the default setting. The Element Transfer Position Half can be
adjusted on a range of -50 to +50. When the desired value has been
selected, press OK/ENTER to return to the service menu.
Select EXIT and press OK/ENTER to return to the top level menu