Gateway 200STM, Руководство пользователя

Страница: 259 / 316

253
Updating device drivers
www.gateway.com
To update device drivers:
1
Insert the red Drivers CD into your CD-RW, DVD, or combination
DVD/CD-RW drive on your docking station. The System Restoration Kit
program starts. Go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
2
Click
Start
, then click
Run
. The Run dialog box opens.
3
In the
Open
text box, type d:\runmenu.exe (where d is the drive letter
of your CD-RW, DVD, or combination DVD/CD-RW drive).
4
Click
OK
. The System Restoration Kit program starts.
5
If the Welcome to the System Restoration Kit window opens, close it by
clicking
OK
.
6
Click the
Update
tab.
7
Click
Check Now
. The Connect window opens.
8
Install available updated device drivers by following the on-screen
instructions. Depending on the device driver you are updating, you may
only need to restart your computer to complete the installation. However,
if a setup wizard opens when you restart your computer, follow the
on-screen instructions.
Important If the drive you want to use is not in the docking station
bay, you will need to swap modules to use it. For more
information about swapping modules, see “Changing
drives” on page 166.