background image

1

Replacing the Gateway 200ARC Keyboard

www.gateway.com

Replacing the Gateway 200ARC 
Keyboard

This package includes a replacement keyboard for your Gateway 200ARC 
notebook and these printed instructions.

Tools you need

You need a small Phillips and a small flat-blade screwdriver to replace the 
keyboard.

Preventing static electricity discharge

The components inside your notebook are extremely sensitive to static 
electricity, also known as electrostatic discharge (ESD).

Before replacing the keyboard, follow these guidelines:

Turn off your notebook.

Wear a grounding wrist strap (available at most electronics stores) and 
attach it to a bare metal part of your workbench or other grounded 
connection.

Touch a bare metal surface on your workbench or other grounded object.

Warning

ESD can permanently damage electrostatic 
discharge-sensitive components in your notebook. 
Prevent ESD damage by following ESD guidelines every 
time you replace the keyboard.

Warning

To avoid exposure to dangerous electrical voltages and 
moving parts, turn off your notebook and unplug the power 
cord and modem and network cables and remove the 
battery before opening the case.

Warning

To prevent risk of electric shock, do not insert any object 
into the vent holes of the notebook.

Содержание 200ARC









Отзывы: