107
grinds dry on these parts. The group head seal lays around the shower screen.
CAUTION:
Do not poke with any hard or sharp-edged objects in the group
head to avoid damage.
Tip:
For checking the shower screen and group head seal, we recommend to hold
a small mirror below the group head.
1. Switch off the appliance and unplug. Wait until the appliance cooled down
completely (approx. 30 minutes).
2. Use a small soft nylon brush to remove any particles from the shower screen and
the group head seal within the group head.
3. Then wipe the interior of the group head using a soft damp cloth.
4. Connect the appliance to the mains power supply and switch on. Wait until the
power button is illuminated continuously. Insert the portafilter in the group head
but
without filter basket and coffee powder
.
5. Ensure that the water tank is filled and the drip tray is empty. With the appliance
switched on, purge the shower screen within the group head by pressing the 2
cups button.
6. Repeat step 5 approx. 5 times. This will remove any residues left.
7. Remove the portafilter from the group head and rinse the portafilter with running
tap water.
8. Before continuing in cleaning according to the following sections: switch off and
unplug the appliance. Wait for the appliance to cool down.
CLEANING THE DRIP TRAY
The drip tray should be removed and emptied after each brewing session or, at the
latest, when the filling level indicator is seen. Clean the drip tray daily after switching
off the appliance.
Important:
The water in the drip tray may be hot. Handle with care. Carefully pull
out the drip tray to avoid spilling water in the housing of the appliance. This holds
especially when the drip tray is full up. For cleaning, do not use abrasive cleaners,
pads or cloths, which can scratch the surfaces.
1. Carefully pull the drip tray out of the housing. Remove the cup tray and pull the
filling level indicator upwards and out. Empty the drip tray in the sink. Dispose
of residues of coffee powder in domestic waste.