User’s manual maps + more
Switching the navigation device on and off
- 17 -
3.1.3
Switching the device to standby mode
When you pull out the ignition key, a message will appear shortly
afterwards telling you that the device is being switched to standby
mode.
►
Tap on Standby or wait for the device to go out on its own.
3.1.4
Switching off the device
When the device is mounted in the vehicle, it does not need to be
switched off. However, if you are not going to use the device for a
longer period of time, you can switch it off all the same.
►
Press the (
On/Off
) key and keep it pressed until the device
switches off (approx. 5 seconds).
3.2
Device not mounted
Of course you can also switch the device on and off when it is not
mounted in the vehicle.
3.2.1
Switching on the device
►
Press the (
On/Off
) key and keep it pressed until the device
switches on.
If the navigation device was previously set to standby, the window
which was last visible will appear.
If the device was previously switched off, it will take several seconds for
the software to be started again. The
S
TART
window then appears.
Forgotten your password?
It can happen that you activate the password but are then unable to
remember it.
►
If you forget your password, follow the procedure described in
"Forgotten your password?" on page 21.
3.2.2
Screensaver
When the navigation device is not being supplied with power from the
vehicle, the screensaver is not available.
3.2.3
Switching the device to standby mode
►
Press briefly on the (
On/Off
) key.
- or -
►
In the
S
TART
window tap on
(Switch off).